ECLIPSE - HT9025
EN - 40
6. MAINTENANCE
CAUTION
x
Only expert and trained technicians should perform maintenance
operations. Before carrying out maintenance operations, disconnect all
cables from the input terminals.
x
Do not use the instrument in environments with high humidity levels or
high temperatures. Do not expose to direct sunlight.
x
Always switch off the instrument after use. In case the instrument is not to
be used for a long time, remove the battery to avoid liquid leaks that could
damage the instrument
’
s internal circuits.
6.1. RECHARGING THE INTERNAL BATTERY
When the LCD displays symbol
“
”
, it is necessary to recharge the internal battery.
1. Position the rotary switch to
OFF
and remove the cables from the input terminals.
2. Turn the fastening screw of the battery compartment cover from position
“ ”
to position
“
”
and remove it (see Fig. 3
–
part 2).
3. Remove the rechargeable battery and insert it in the provided recharging base.
4. Insert the power supply in the recharging base.
5. Connect the power supply to the electric mains and to the recharging base. Look for
the green
“
Power
”
LED and red
“
Charge
”
LED to turn on.
6. Carry on the recharging process until the red
“
Charge
”
LED turns off.
7. Disconnect the power supply from the electric mains and extract the battery from the
recharging base.
8. Insert the battery into the instrument again.
9. Restore the battery compartment cover into place and turn the fastening screw from
position
“
”
to position
“ ”
.
6.2. CLEANING THE INSTRUMENT
Use a soft and dry cloth to clean the instrument. Never use wet cloths, solvents, water, etc.
6.3. END OF LIFE
WARNING:
the symbol on the instrument indicates that the appliance and its
accessories must be collected separately and correctly disposed of.