![background image](http://html1.mh-extra.com/html/ht/eclipse-ht9025/eclipse-ht9025_user-manual_2178080026.webp)
ECLIPSE - HT9025
EN - 25
5.5. RESISTANCE MEASUREMENT AND CONTINUITY TEST
CAUTION
Before attempting any resistance measurement, cut off power supply from
the circuit to be measured and make sure that all capacitors are discharged,
if present.
Fig. 27: Use of the instrument for resistance measurement and continuity test
1. Select position
:
CAP
2. Insert the red cable into input terminal
VHz% CAP
:
and the black cable into
input terminal
COM
.
3. Position the test leads in the desired spots of the circuit to be measured (see Fig. 27).
The display shows the value of resistance.
4. If the display shows message
“
OL
”
, select a higher range.
5. Press the
MODE/VFD
key to select
“ ”
measurement, relevant to the continuity test,
and position the test leads in the desired spots of the circuit to be measured.
6. The value of resistance (which is only indicative) is displayed in
:
and the instrument
sounds if the value of resistance is <50.
:
7. To use the HOLD and RANGE functions, see § 4.2
8. To use the internal functions, see § 4.3
9. To save the measured result, see § 4.3.4