HRC 2006 CBR1000RR, Set-Up Manual/Parts List, Page: 96 / 162

2-76
Racing Kit
(1) LEFT SIDE COLLAR
Driven flange bearing replacement
Remove the driven flange left side collar using two
screwdrivers as shown.
Remove the circlip from the drive flange.
Drive out the driven flange bearing and right side
collar as an assembly from the driven flange.
(1)
(1)
(1) CIRCLIP
(1) RIGHT SIDE COLLAR
Install the driven flange right side collar.
Install the circlip into the groove securely.
(1) DRIVER
(2) ATTACHMENT/PILOT
Drive the new driven flange bearing into the driven
flange until it seat using the special tools.
Never install old bearings; once the bearing have
been removed, they must be replaced with new
ones.
Tools:
Driver
07749–0010000
Attachment, 62 x 68 mm 07746–0010500
Pilot, 25 mm 07746–0040600
(1)
(1)
(2)
(1)
(1) CIRCLIP
02. Racing Kit_P1 06.2.20 6:55 PM Page 76