HRC 2006 CBR1000RR, Set-Up Manual/Parts List, Page: 65 / 162

2-45
Racing Kit
6. Remove the fast idle wax unit water hoses from the thermostat housing and
water joint, and cut the hose end about 50 mm as shown in the illustration.
7. Install the cutted hoses to the thermostat housing and water joint and secure
them with clamps.
8. Install the hose plugs in the racing kit to the hose ends, and secure them with
the clamps that are attached on the fast idle wax unit.
Link
(remove)
Screw
(remove)
Wax unit
(remove)
Throttle stop screw set
Bracket
Plug
(racing kit)
Plug
(racing kit)
Remove
Remove
Fast Idle Wax Unit Removal
1. Remove the throttle body.
2. Remove the fast idle wax unit from the throttle body.
3. Remove the screw and then remove the fast idle wax unit link from the link
arm shaft.
4. Cut the wax unit bracket, then remove the wax unit.
5. Reinstall the removed bracket onto the throttle body.
50 mm
50 mm
02. Racing Kit_P1 06.2.20 6:55 PM Page 45