HRC 2006 CBR1000RR, Set-Up Manual/Parts List, Page: 80 / 162

2-60
Racing Kit
(1) TAPERED END
(2) FORK SPRING
Install the fork spring into the fork slider with the
tapered end facing up.
(1) DAMPER ROD HOLDER
(2) SPRING COLLAR
(3) SPRING SEAT STOPPER
Extend the fork damper fully and install the damper
rod holder onto the damper rod adjust case.
TOOL:
Damper rod holder
070MB-MEL0200 or
070MB-MELC200 or
Showa special tool No.301
Install the spring collar and spring seat stopper.
(1) OIL LEVEL
Slowly down the slider, and gently seat the dust seal
onto the axle holder and leave it for 5 minutes.
After the oil level stabilizes, measure the oil level
from top of the fork slider.
Be sure the oil level is the same in the both forks.
(1)
(2)
(1)
(3)
(2)
(1)
02. Racing Kit_P1 06.2.20 6:55 PM Page 60