HRC 2006 CBR1000RR, Set-Up Manual/Parts List, Page: 69 / 162

2-49
Racing Kit
Oil catch tank
(racing kit)
Breather tube
(racing kit)
Breather return tube
(racing kit)
Oil Catch Tank Installation
1. Disconnect the crankcase breather tube from the air cleaner housing and
cylinder head cover, then remove the breather tube.
2. Install the breather tubes in the racing kit to the oil catch tank.
3. Attach the suitable piece of rubbers between the tabs of the oil catch tank
and frame.
4. Install the oil catch tank assembly into the frame (the place previously
installed the EVAP PAIR control valve), tighten the bolts and nuts securely.
5. Connect the breather tube to the cylinder head cover and air cleaner hous-
ing and secure them with clips.
Clamp
(racing kit)
Stay
(racing kit)
Clip
(racing kit)
02. Racing Kit_P1 06.2.20 6:55 PM Page 49