HRC 2006 CBR1000RR, Set-Up Manual/Parts List, Page: 31 / 162

2-11
Racing Kit
Oil Pan Set Installation
Clean any oil off the mating surface of the oil level finder and racing kit oil pan.
Avoid damaging the oil seal, carefully install the oil level finder into the racing
kit oil pan by pushing it by hand.
Apply locking agent to the oil level finder stopper plate bolt threads.
Install the stopper plate and tighten the bolt securely. Remove the standard oil pan and oil strainer.
Install the oil strainer gasket to the racing kit strainer, then install the racing kit
oil strainer to the oil pump.
Apply sealant to the mating surface of the oil pan.
Install the racing kit oil pan and tighten the bolts in a crisscross pattern in 2 or
3 steps.
Install the racing kit oil drain bolt with a new sealing washer.
Secure the oil drain bolt with a locking wire.
Oil level finder
(racing kit)
Stopper plate
(racing kit)
Bolt
(racing kit)
Apply locking
agent
Oil strainer
(racing kit)
Drain bolt
(racing kit)
New sealing washer
(racing kit)
Oil pan
(racing kit)
Flange bolts
(racing kit)
02. Racing Kit_P1 06.2.20 6:54 PM Page 11