4.
.
5.
.
6.
.
7.
Remove the front panel/drive cage assembly
.
8.
Remove the internal USB drive, if installed. To locate the internal USB connector, see "
9.
Remove the microSD card, if installed. To locate the microSD card, see "
."
.
11. Remove all DIMMs
.
12.
Do the following:
a. Observe the guidelines and procedures for NVDIMM relocation
.
.
13. Remove all mezzanine option cards
14.
Remove the processor heatsink assembly, and place it on a flat, level surface.
15.
Disassemble the heatsink blank, and then use the dust cap to cover the CPU socket on the system
board.
16.
Remove the mezzanine frame.
17.
Remove the system board from the base pan:
a.
Grasp the system board handle at the front.
b.
Slide it rearward to just beyond the pan arrow marking.
Removal and replacement procedures
51
Summary of Contents for Synergy 480 Gen10 series
Page 23: ...Customer self repair 23 ...
Page 24: ...24 Customer self repair ...
Page 25: ...Customer self repair 25 ...
Page 26: ...26 Customer self repair ...