HPE Synergy 480 Gen10 series Page 37 Maintenance And Service Manual Download

Page: 37 / 81

Removing and replacing the front panel/drive cage assembly

Procedure

1. Power down the compute module

2. Remove the compute module

Place the compute module on a flat, level work surface.

4. Remove the access panel

5. Remove all drives

Remove the front panel/drive cage assembly.

To replace the component, reverse the removal procedure.

Removing and replacing a mezzanine option card

Procedure

1. Power down the compute module

2. Remove the compute module

Place the compute module on a flat, level work surface.

4. Remove the access panel

Remove the mezzanine option card.

Removing and replacing the front panel/drive cage assembly

Summary of Contents for Synergy 480 Gen10 series


















































































Search results

Summary of Contents for Synergy 480 Gen10 series

Reviews:

Related manuals for Synergy 480 Gen10 series

Brands by name

Popular brands

HPE Synergy 480 Gen10 series, Maintenance And Service Manual

Search results

Summary of Contents for Synergy 480 Gen10 series

Reviews:

Related manuals for Synergy 480 Gen10 series

Brands by name

Popular brands