HPE Synergy 480 Gen10 series Maintenance And Service Manual Download

Page: 61 / 81

Item

Description

Compute module handle release latch

Compute module handle

If uFF drives (the SFF Flash Storage Adapter) are installed in the drive bays, the drive bay numbering is different. For
more information, see

Drive numbering

Serial label pull tab information

The serial label pull tab is located on the front panel of the compute module. To locate the serial label pull tab,
see

Front panel components

. The serial label pull tab provides the following information:

• Product serial number

• HPE iLO information

• QR code that points to mobile-friendly documentation

Drive numbering

Depending on the configuration, this compute module can support hard drives, SSDs, NVMe drives, and uFF
drives (supported in dual SFF flash adapters) in the drive bays. Depending on the device installed, the bay
number might be different.

Item

Hard drive/SSD bay
numbering

uFF drive bay
numbering

NVMe drive bay
numbering

1 and 101

2 and 102

Serial label pull tab information

Summary of Contents for Synergy 480 Gen10 series


















































































Search results

Summary of Contents for Synergy 480 Gen10 series

Reviews:

Related manuals for Synergy 480 Gen10 series

Brands by name

Popular brands

HPE Synergy 480 Gen10 series, Maintenance And Service Manual

Search results

Summary of Contents for Synergy 480 Gen10 series

Reviews:

Related manuals for Synergy 480 Gen10 series

Brands by name

Popular brands