NOTE:
If you are installing a Type C mezzanine option card into mezzanine slot 2 of the compute module and the
heatsink has an airflow baffle installed on it, then remove it. If the heatsink does not have an airflow baffle,
then mezzanine 2 cannot be used. If a Type C mezzanine option card is not in mezzanine slot 2, leave the
airflow baffle attached to the heatsink.
To replace the component, reverse the removal procedure.
Removing and replacing a heatsink blank
Procedure
1. Power down the compute module
.
.
3.
Place the compute module on a flat, level work surface.
38
Removing and replacing a heatsink blank
Summary of Contents for Synergy 480 Gen10 series
Page 23: ...Customer self repair 23 ...
Page 24: ...24 Customer self repair ...
Page 25: ...Customer self repair 25 ...
Page 26: ...26 Customer self repair ...