HPE Synergy 480 Gen10 series Page 46 Maintenance And Service Manual Download

Page: 46 / 81

4. Remove the access panel

5. Remove all drives from the drive cage

6. Remove the front panel/drive cage assembly

Remove the storage controller.

To replace the component, reverse the removal procedure.

Removing and replacing the drive backplane

Procedure

1. Power down the compute module

2. Remove the compute module

Place the compute module on a flat, level work surface.

4. Remove the access panel

5. Remove all drives

6. Remove all drive blanks

CAUTION:

Remove all drives and drive blanks before removing the drive backplane.

Disconnect the premium backplane cable.

8. Remove the front panel/drive cage assembly

Remove the drive backplane from the front panel/drive cage assembly.

Removing and replacing the drive backplane

Summary of Contents for Synergy 480 Gen10 series


















































































Search results

Summary of Contents for Synergy 480 Gen10 series

Reviews:

Related manuals for Synergy 480 Gen10 series

Brands by name

Popular brands

HPE Synergy 480 Gen10 series, Maintenance And Service Manual

Search results

Summary of Contents for Synergy 480 Gen10 series

Reviews:

Related manuals for Synergy 480 Gen10 series

Brands by name

Popular brands