HPE Synergy 480 Gen10 series Page 64 Maintenance And Service Manual Download | Manualshive

Page: 64 / 81

background image

Item

Component

Description

4

Drive status LED

• Off—The drive is not configured by a RAID controller or a spare

drive.

• Solid green—The drive is a member of one or more logical

drives.

• Flashing green (4 Hz)—The drive is operating normally and has

activity.

• Flashing green (1 Hz)—The drive is rebuilding, erasing, or

performing a RAID migration, stripe size migration, capacity
expansion, logical drive extension, or spare activation.

• Flashing amber/green (1 Hz)—The drive is a member of one or

more logical drives that predicts the drive will fail.

• Solid amber—The drive has failed.

• Flashing amber (1 Hz)—The drive is not configured and predicts

the drive will fail.

5

Adapter ejection release latch
and handle

Removes the SFF flash adapter when released.

NVMe SSD components

The NVMe SSD is a PCIe bus device. A device attached to a PCIe bus cannot be removed without allowing
the device and bus to complete and cease the signal/traffic flow.

CAUTION:

Do not remove an NVMe SSD from the drive bay while the Do not remove LED is flashing. The Do not
remove LED flashes to indicate that the device is still in use. Removing the NVMe SSD before the
device has completed and ceased signal/traffic flow can cause loss of data.

64

NVMe SSD components

«
...
62
63
64
65
66
...
»

Summary of Contents for Synergy 480 Gen10 series


















































































Reviews:

No comments

Related manuals for Synergy 480 Gen10 series

Brand: Steinberg Pages: 820

Brand: Vecow Pages: 33

Brand: ZAHNER Pages: 24

Brand: Quanmax Pages: 34

Vaio VGC-JS410F/S

Brand: Sony Pages: 2

VAIO VGC-JS320JS

Brand: Sony Pages: 2

VAIO VGC-JS270J/Q

Brand: Sony Pages: 2

Vaio VGC-JS250J/B

Brand: Sony Pages: 2

Vaio VGC-JS230J/T

Brand: Sony Pages: 2

Vaio VGC-JS230J/P

Brand: Sony Pages: 2

Vaio VGC-JS230J/B

Brand: Sony Pages: 2

Vaio VGC-JS210J/B

Brand: Sony Pages: 2

VAIO VGC-JS155J/B

Brand: Sony Pages: 2

Brand: Sony Pages: 2

Brand: Sony Pages: 25

VAIO VGC-JS110 Series

Brand: Sony Pages: 24

VAIO VGC-JS300 Series

Brand: Sony Pages: 120

VAIO VGC-JS200 SERIES

Brand: Sony Pages: 136

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands