Item
Description
Status
3
Mezzanine NIC status LED
Solid green= Link on any Mezzanine NIC
Flashing green= Activity on any Mezzanine NIC
Off = No link or activity on any Mezzanine NIC
4
Power On/Standby button and system
power LED
Solid green = System on
Flashing green (1 Hz/cycle per sec) = Performing power
on sequence
Solid amber = System in standby
Off = No power present
NOTE:
If all other LEDs are off, no compute module power is
present (facility power is not present, power cord is not
attached, power supplies are not installed, power supply
failure has occurred, or the power button cable is
disconnected). If the health LED is flashing green while
the system power LED is off, the
Power On/Standby
button service is initializing or an iLO reboot is in
progress.*
Front panel components
Item
Description
1
2
3
External USB iLO Service Port (169.254.1.2) - located behind the Serial label pull tab
4
External USB 3.0 connector (located behind the Serial label pull tab)
Table Continued
60
Front panel components
Summary of Contents for Synergy 480 Gen10 series
Page 23: ...Customer self repair 23 ...
Page 24: ...24 Customer self repair ...
Page 25: ...Customer self repair 25 ...
Page 26: ...26 Customer self repair ...
