manualshive.com logo in svg

HPE Synergy 480 Gen10 series, Maintenance And Service Manual

Share
Download
HPE Synergy 480 Gen10 series Maintenance And Service Manual Download Page 40

IMPORTANT:

Be sure to install the Smart Storage Battery in the same baffle from which it was removed when
replacing it.

Removing and replacing DIMMs

Procedure

1. Power down the compute module

.

2. Remove the compute module

.

3.

Place the compute module on a flat, level work surface.

4. Remove the access panel

.

5. Remove all DIMM baffles

.

IMPORTANT:

Flip the DIMM baffle on top of the heatsink, and leave the Smart Storage Battery installed and on the
baffle when accessing the right DIMM baffle.

See "

DIMM slot locations

" to identify DIMMs installed in the compute module.

6.

Remove the DIMM.

To replace the component, reverse the removal procedure. Use HPE UEFI System Utilities to configure the
memory mode.

CAUTION:

• To prevent improper cooling and thermal damage, always install DIMMs of the same height in the

compute module.

• This compute module does not support mixing standard and nonstandard height DIMMs.

40

 Removing and replacing DIMMs

Summary of Contents for Synergy 480 Gen10 series


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands