HPE ProLiant DL180, User Manual

Page: 52 / 172

• Extend the server from the rack .
• Remove the server from the rack .
4. Remove the access panel .
5. Remove the riser cage .
6. Remove the expansion boards from the riser cage, if any.
7. Remove the riser board.
• Primary riser cage
• Secondary riser cage
Removing the air baffle
CAUTION: For proper cooling, do not operate the server without the access panel, baffles,
expansion slot blanks, or blanks installed. If the server supports hot-plug components, minimize the
amount of time the access panel is open.
Procedure
1. If installed, remove the front bezel .
2. Power down the server .
3. Remove all power:
52 Operations