HPE ProLiant DL180, User Manual

Page: 48 / 172

Removing a riser cage
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal
system components to cool before touching them.
Procedure
1. If installed, remove the front bezel .
2. Power down the server .
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Disconnect all peripheral cables from the server.
5. Do one of the following:
• Extend the server from the rack .
• Remove the server from the rack .
6. Remove the access panel .
7. Disconnect any internal cables that are connected to the expansion board.
8. If the GPU is installed in the secondary riser cage, do the following:
a. Disconnect the power cable from GPU .
b. To release GPU, press the latch on the air baffle.
9. Remove the riser cage:
48 Operations