manualshive.com logo in svg

HPE ProLiant DL160 Gen10, Maintenance And Service Manual, Page: 4 / 125

Share
Download
HPE ProLiant DL160 Gen10 Maintenance And Service Manual Download Page 4

Removing the secondary PCI riser cage..........................................................................33
Removing the universal media bay blank........................................................................ 34
Removing an expansion board........................................................................................ 35

Removing and replacing the bezel ears......................................................................................37
Removing and replacing a drive blank........................................................................................39
Removing and replacing a hot-plug drive................................................................................... 39
Removing and replacing an NVMe drive.................................................................................... 40
Removing and replacing an M.2 SSD.........................................................................................41
Removing and replacing the non-hot-plug power supply............................................................42
Removing and replacing the hot-plug power supply................................................................... 44
Removing and replacing a fan.................................................................................................... 46
Removing and replacing a fan blank...........................................................................................47
Removing and replacing the FlexibleLOM.................................................................................. 48
Removing and replacing the Media Module................................................................................49
Removing and replacing the serial port...................................................................................... 50
Removing and replacing the optical drive................................................................................... 52
Removing and replacing the Slim SSD and holder.....................................................................54
Removing and replacing the 4 LFF front panel cable assemblies.............................................. 55
Removing and replacing the 8 SFF front panel cable assemblies..............................................57
Removing and replacing the Chassis Intrusion Detection switch............................................... 60
Removing and replacing the DIMM guards.................................................................................61
Removing and replacing a DIMM................................................................................................62
Removing and replacing a storage controller............................................................................. 63
System battery replacement....................................................................................................... 64

System battery information...............................................................................................65
Removing and replacing the system battery.................................................................... 65

Removing and replacing the Smart Storage Battery and holder.................................................66
Removing and replacing a processor heatsink assembly...........................................................67
Removing and replacing the system board.................................................................................69

Re-entering the server serial number and product ID...................................................... 72

Removing and replacing the 4-bay LFF drive backplane............................................................73
Removing and replacing the 8-bay SFF drive backplane........................................................... 74
Removing and replacing the 2-bay SFF SAS/SATA drive backplane......................................... 75
Removing and replacing the 2-bay NVMe drive backplane........................................................ 76
HPE Trusted Platform Module 2.0 Gen10 Option....................................................................... 78

Troubleshooting.................................................................................... 79

Troubleshooting resources..........................................................................................................79

Diagnostic tools.................................................................................... 80

Product QuickSpecs................................................................................................................... 80
UEFI System Utilities.................................................................................................................. 80

Selecting the boot mode ................................................................................................. 80
Secure Boot......................................................................................................................81
Launching the Embedded UEFI Shell ............................................................................. 81

Intelligent Provisioning................................................................................................................ 82

Intelligent Provisioning operation..................................................................................... 82

HPE Insight Remote Support......................................................................................................83
USB support................................................................................................................................83

External USB functionality................................................................................................83

HPE Smart Storage Administrator.............................................................................................. 84

Component identification.....................................................................85

4

Summary of Contents for ProLiant DL160 Gen10






























































































































Reviews:

No comments