Removing and replacing the Media Module
Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
Procedure
1.
Back up all server data.
2.
.
3.
4.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
5.
Disconnect all peripheral cables from the server.
6.
Do one of the following:
•
Extend the server from the rack
•
Remove the server from the rack
.
7.
.
8.
Remove the primary PCI riser cage
9.
Remove the two T-15 screws.
10.
Pull back the plastic retaining latch.
Removal and replacement procedures
49
Summary of Contents for ProLiant DL160 Gen10
