manualshive.com logo in svg

HPE ProLiant DL160 Gen10, Maintenance And Service Manual, Page: 73 / 125

Share
Download
HPE ProLiant DL160 Gen10 Maintenance And Service Manual Download Page 73

Procedure

1.

Access System Utilities. During POST, press 

F9

.

2.

On the System Utilities home screen, select 

System Configuration

 > 

BIOS/Platform Configuration

(RBSU)

 > 

Advanced Options

 > 

Advanced Service Options

.

3.

Select the Serial Number field and press 

Enter

.

The following alert appears:

The serial number is modified by qualified service personnel and must match
the serial number located on the chassis.

4.

Click 

OK

.

5.

Type the serial number and press 

Enter

.

6.

Select the Product ID field and press 

Enter

.

The following alert appears:

Product ID is modified only by qualified personnel. This value must match
the product ID located on the chassis.

7.

Type the product ID and press 

Enter

.

8.

Press 

F10 

to save the configuration.

The procedure is complete.

Removing and replacing the 4-bay LFF drive backplane

Prerequisites

Flat-headed screwdriver

Procedure

1.

If installed, 

remove the bezel

.

2. Power down the server

.

3.

Remove all power:

a.

Disconnect each power cord from the power source.

b.

Disconnect each power cord from the server.

4.

Do one of the following:

a. Extend the server from the rack

.

b. Remove the server from the rack

.

5. Remove the access panel

.

6.

Remove all LFF drives.

7.

Disconnect all cables from the 4-bay LFF drive backplane.

8.

Remove the drive backplane.

Removal and replacement procedures

73

Summary of Contents for ProLiant DL160 Gen10






























































































































Reviews:

No comments