Removing the secondary PCI riser cage
Procedure
1.
Observe the following alerts:
CAUTION:
To prevent damage to the server or expansion boards, power down the server and
remove all AC power cords before removing or installing the PCI riser cage.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
2.
Back up all server data.
3.
.
4.
5.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
6.
Do one of the following:
•
Extend the server from the rack
•
Remove the server from the rack
.
7.
.
8.
Do one of the following:
Removal and replacement procedures
33
Summary of Contents for ProLiant DL160 Gen10
