HPA-Faip M 322, Operator'S Manual

Page: 42 / 59

100
M 322
Operator Manual
Clean with a dry cloth. Avoid contact with solvents.
CAUTION!
The filter-regulator unit filters the air and regu-
lates air pressure.
The FRL unit supports a maximum input pressure
of 15 bar and has an adjustment range of 0.5 to
10 bar. The setting may be modified by pulling
the handle out and then turning. After adjust-
ing, return the handle to the locked position by
pushing down (fig. 49a).
The regulating filter unit is equipped with a
semiautomatic device to drain the condensate.
This device is automatically activated whenever
pneumatic supply to the machine is cut off. Drain
the condensate manually (1, Fig. 49b) when the
level rises above level 2, Fig. 49b.
9. INFORMATION
ABOUT SCRAPPING
If the machine is to be scrapped, remove all electrical, electronic, plastic and metal parts
and dispose of them separately in accordance with current provisions as prescribed by law.
10. ENVIRONMENTAL INFORMATION
The disposal procedure described below only applies to machines with the symbol of
the waste bin with a bar across it on their data plates.
This product may contain substances that can be hazardous to the environment and to
human health if it is not disposed of properly.
The following information is therefore provided to prevent the release of these substances
and to improve the use of natural resources.
Electrical and electronic equipment should never be disposed of in the usual municipal
49b
1
2
49a