76
M 322
Operator Manual
inspecting the wheel during inflation.
t8IFFMJOTUBMMBUJPOBOESFNPWBM
3. Employers must evaluate the ability of their employees to carry out these tasks and
work on the wheels in absolutely safety and must provide additional training as required
to make sure that all employees maintain their skills.
1.6. PRELIMINARY CHECKS
Before starting to work, carefully check that all machine components, particularly rub-
ber or plastic parts, are in place, in good condition and operate correctly. If damage or
excessive wear is found during the inspection phase, replace or repair the component
immediately regardless of the amount of damage or wear.
1.7. DURING USE
If strange or unusual noises are heard, if a component or system is not operating correctly
or if you observe anything unusual, immediately stop using the machine.
t*EFOUJGZUIFDBVTFBOEUBLFBOZOFDFTTBSZSFNFEJBM
action.
t$POUBDUZPVSTVQFSWJTPSJGOFDFTTBSZ
Make sure that all other people are positioned at
least 6 metres (20 feet) from the machine.
To stop the machine in an emergency:
tEJTDPOOFDUUIFQPXFSTVQQMZQMVH
tJOUFSSVQUUIFDPNQSFTTFEBJSTVQQMZCZEJTDPOOFDU
-
ing the supply pipe.
2. TRANSPORT, STORAGE AND HANDLING
Conditions for transporting the machine
The tyre changer must be transported in its original packaging and stowed in the position
shown on the packaging itself.
- Packaging dimensions:
tXJEUI
.........................................................................................................................835 mm
tEFQUI
......................................................................................................................1140 mm
tIFJHIU
........................................................................................................................990 mm
- Weight with packaging:
t4UBOEBSEWFSTJPO
........................................................................................................192 kg
t'4WFSTJPO
.....................................................................................................................202 kg
Ambient conditions for machine transport and storage
Temperature: range from -25° ÷ +55°C.
Summary of Contents for M 322
