M 322
Operator Manual
91
- After mounting the bottom bead, repeat the same procedure for the top bead (Fig.
33).
- Move the arm out of the working position, then remove the wheel from the tyre changer.
6.7. APPROVED UHP AND RUN FLAT TYRE DEMOUNTING AND
MOUNTING PROCEDURE
For a detailed description of the UHP and RUN FLAT tyre mounting/demounting pro-
cedure, please refer to the instructions in the manual prepared by WDK (German Tyre
Industry Association).
6.8. TYRE INFLATION
6.8.a. SAFETY REGULATIONS
RISK OF EXPLOSION
Never exceed the pressure recommended by the tyre
manufacturer. Never mount tyres on rims with a differ-
ent diameter.
An exploding tyre can cause personal injury or death.
DANGER
We do not recommend using inflation devices (e.g. gun) connected to compressed
air sources other than the machine.
DANGER
Always comply with the national safety regulations, which may be more restrictive
with respect to this manual, following the principle that the more restrictive standard
takes precedence over the less restrictive one.
CAUTION!
Summary of Contents for M 322
