90
M 322
Operator Manual
6.6. MOUNTING
RISK OF EXPLOSION:
Always check that the tyre/rim combination is correct in terms of compatibility (tube-
less tyre on tubeless rim; tube type tyre on tube type rim) and geometrical size (keying
diameter, cross-section width, Off-Set and shoulder profile) before mounting.
TAKE ALL PRECAUTIONS TO AVOID SERIOUS OR FATAL INJURY .
Also check that rims are not deformed, that their fixing holes have not become oval,
that they are not encrusted or rusty and that they do not have sharp burrs on the
valve holes.
Make sure that the tyre is in good condition without any signs of undue wear or damage.
DANGER
30
31
F
32
-
Lubricate the sides of the tyre thoroughly along
the entire circumference of the bottom and top
beads (Fig.30).
-
Place the tyre on top of the wheel and move the
horizontal arm into the working position.
- Place the bottom bead under the front of the head.
- Press the turntable control pedal (F, Fig. 31) to ro-
tate clockwise and mount the bead. Use the rim well
space, pressing onto the right hand sidewall to reduce
torsion on the bead as the wheel rotates (fig. 32).
33
Summary of Contents for M 322
