Product information
Table 1-1
Product information
Topic
Location
Technical specifications
Go to
www.hp.com/go/quickspecs
. In the left pane, select your region and then
select
Workstations
.
HP Cool Tools (Windows® 7
only)
Most HP workstations with the Windows 7 operating system are preloaded with tools
that may enhance system performance and with additional software that is not
automatically installed during first boot. To access these applications:
●
Click the
HP Cool Tools
icon on the desktop, or
●
Open the
HP Cool Tools
folder by selecting
Start
>
All Programs
>
HP
>
HP Cool Tools
.
To learn more about these applications, click
HP Cool Tools—Learn More
.
To install or launch the applications, click the appropriate application icon.
Regulatory information
Refer to the
Safety & Regulatory Information
guide for product regulatory information.
You can also refer to the regulatory label on the workstation chassis.
Accessories
For complete and current information on supported accessories and components, see
http://www.hp.com/go/workstations
.
System board
A diagram of the system board is located on the inside of the chassis (all-in-one
configuration). Additional information is located in the workstation
Maintenance and
Service Guide
on the Web at
http://www.hp.com/support/workstation_manuals/
.
Serial number, Certificate of
Authenticity (COA), and Genuine
Microsoft Label (GML) (if
applicable)
The serial number label is on a pull-out card on the side of the display (all-in-one
configuration). The COA (Windows 7) and GML (Windows 8) are typically located
near the serial number label. Some workstations have this label on the bottom panel.
Linux
For information on running Linux on HP workstations, go to
http://www.hp.com/
linux/
, then select
Linux on Workstations
from the list on the left.
2
Chapter 1 Locating HP resources
