HP Z1 User Manual Download

Page: 52 / 61

Upgrading BIOS

To find and download the latest available BIOS, which includes the latest enhancements:

Go to

http://www.hp.com/go/workstationsupport

Select

Download Drivers and Software

from the left menu column under Tasks.

Follow the instructions to locate the latest BIOS available for the workstation.

If the BIOS on the website is the same as the version on your system, no further action is required.

If the BIOS on the website is a version later than the one on your system, download the

appropriate version for the workstation. Follow the instructions in the release notes to complete the

installation.

Upgrading device drivers

If you install a peripheral device (such as a printer, display adapter, or network adapter), confirm you

have the latest device drivers loaded. If you purchased your device through HP, visit the HP website to

download the latest drivers for your device. These drivers have been tested to ensure the best

compatibility between your device and your HP workstation.

If you did not purchase your device from HP, HP recommends visiting the HP website first to see if your

device and its drivers have been tested for HP workstation compatibility. If no driver is available, visit

the device manufacturer's website to download the latest drivers.

To upgrade device drivers:

Go to

http://www.hp.com/go/workstationsupport

Under

Tasks

in the left column, select

Download Drivers and Software

Follow the instructions to find the latest drivers available for the workstation.

If a needed driver is not found, see the website of the manufacturer of the peripheral device.

Chapter 7 Updating the workstation

Summary of Contents for Z1






























































Search results

Summary of Contents for Z1

Reviews:

Related manuals for Z1

Brands by name

Popular brands

HP Z1, User Manual

Search results

Summary of Contents for Z1

Reviews:

Related manuals for Z1

Brands by name

Popular brands