HP XT905UT User Manual Download Page 92

Page: 92 / 183

Testing an AC adapter

Test the AC adapter if the computer exhibits any of the following symptoms:

●

The computer will not turn on when connected to the AC adapter.

●

The display does not turn on when the computer is connected to the AC adapter and external
power.

●

The power light is off when the computer is connected to the AC adapter.

To test the AC adapter:

Remove the battery from the computer.

Connect the AC adapter to the computer and to an AC outlet.

Turn on the computer.

●

If the power light turns

, the AC adapter is functioning properly.

●

If the power light remains

off

, the AC adapter is not functioning and should be replaced.

Contact technical support for information on obtaining a replacement AC power adapter. Select

Start

Help and Support

Contact support

Shutting down the computer

CAUTION:

Unsaved information will be lost when the computer is shut down.

The Shut Down command closes all open programs, including the operating system, and then turns off
the display and computer.

Shut down the computer under any of the following conditions:

●

When you need to replace the battery or access components inside the computer

●

When you are connecting an external hardware device that does not connect to a USB port

●

When the computer will be unused and disconnected from external power for an extended period

To shut down the computer, follow these steps:

NOTE:

If the computer is in Standby or in Hibernation, you must first exit Standby or Hibernation before

shutdown is possible.

Save your work and close all open programs.

Select

Start

Turn Off Computer

Turn Off

NOTE:

If you have been registered to a network domain, the button you click will be called Shut

Down instead of Turn Off Computer.

Chapter 5 Power management

Summary of Contents for XT905UT
























































































































































































Search results

Summary of Contents for XT905UT

Reviews:

HP XT905UT, User Manual, Page: 92 / 183

Search results

Summary of Contents for XT905UT

Reviews: