manualshive.com logo in svg

HP XT905UT, User Manual, Page: 146 / 183

Share
Download
HP XT905UT User Manual Download Page 146

11 Software Updates

Updating software

Updated versions of the software provided with your computer are available either through the HP
Software Update utility or on the HP Web site.

The Software Update utility automatically checks for software updates from HP. The utility runs every
30 days and provides a list of support alerts, such as security enhancements, and optional software and
driver updates.

You can manually check for updates at any time by selecting 

Start

 

>

 

Help and Support

 

>

 

Update

Software & Drivers

, and then follow the on-screen instructions.

Most software on the HP Web site is packaged in compressed files called 

SoftPaqs

. Some BIOS updates

may be packaged in compressed files called 

ROMPaqs

.

Some download packages contain a file named Readme.txt, which contains information regarding
installing and troubleshooting the file. (Readme.txt files included with ROMPaqs are provided in English
only.)

You can also access software updates by obtaining the 

Support Software

 disc (purchased separately).

This disc includes device drivers, BIOS updates, and utilities.

1.

Open your Internet browser, and go to 

http://www.hp.com/support

.

2.

Select your country or region.

3.

Click the option for software and driver downloads, and then type your computer model number in
the product box.

4.

Press 

enter

.

5.

Follow the on-screen instructions.

To update the software using a 

Support Software

 disc, follow these steps:

1.

Insert the 

Support Software

 disc into the optical drive.

2.

Follow the on-screen instructions.

134 Chapter 11   Software Updates

Summary of Contents for XT905UT
























































































































































































Reviews:

No comments