manualshive.com logo in svg

HP XT905UT, User Manual, Page: 16 / 183

Share
Download
HP XT905UT User Manual Download Page 16

Component

Description

(7)

TouchPad light

●

Blue: TouchPad is on.

●

Amber: TouchPad is off.

(8)

Caps lock light

On: Caps lock is on.

(9)

Num lock light

On: Num lock is on.

(10)

Volume mute light

●

On: Computer sound is on.

●

Amber: Computer sound is off.

(11)

Volume down light

Blinking: The volume scroll zone is being used to decrease speaker
volume.

(12)

Volume up light

Blinking: The volume scroll zone is being used to increase speaker
volume.

(13)

Calculator light

●

On: The Windows® calculator function is on.

●

Blinking: The Windows calculator is in use.

*The two power lights display the same information. The light on the power button is visible only when the computer is open.
The power light on the front of the computer is visible whether the computer is open or closed.

†

The two wireless lights display the same information. The light on the wireless button is visible only when the computer is open.

The wireless light on the front of the computer is visible whether the computer is open or closed.

Buttons, switches, and fingerprint reader

4

Chapter 1   Features

Summary of Contents for XT905UT
























































































































































































Reviews:

No comments