manualshive.com logo in svg

HP XT905UT, User Manual, Page: 112 / 183

Share
Download
HP XT905UT User Manual Download Page 112

Using external drives

Removable external drives expand your options for storing and accessing information. A USB drive can
be added by connecting the drive to a USB port on the computer.

USB drives include the following types:

●

1.44-megabyte diskette drive

●

Hard drive module (a hard drive with an adapter attached)

●

DVD-ROM Drive 

●

DVD/CD-RW Combo Drive

●

DVD±RW/CD-RW Combo Drive

Using optional external devices

NOTE:

For more information about required software and drivers, or to learn which computer port to

use, refer to the manufacturer's instructions.

To connect an external device to the computer:

CAUTION:

To reduce the risk of damage to the equipment when connecting a powered device, be

sure that the device is turned off and the AC power cord is unplugged.

1.

Connect the device to the computer.

2.

If you are connecting a powered device, plug the device power cord into a grounded AC outlet.

3.

Turn on the device.

To disconnect an unpowered external device, turn off the device, and then disconnect it from the
computer. To disconnect a powered external device, turn off the device, disconnect it from the computer,
and then unplug the AC power cord.

100 Chapter 7   External devices

Summary of Contents for XT905UT
























































































































































































Reviews:

No comments