manualshive.com logo in svg

HP XT905UT, User Manual, Page: 73 / 183

Share
Download
HP XT905UT User Manual Download Page 73

To use the HP Web site:

1.

Open your Internet browser, go to 

http://www.hp.com/support

, and select your country or region.

2.

Click the option for software and driver downloads, and then type your computer model number in
the product box.

3.

Press 

enter

, and then follow the on-screen instructions.

Obtaining Microsoft device drivers

You can obtain the latest Windows device drivers by using Microsoft® Update. This Windows feature
can be set to automatically check for and install updates for your hardware drivers, as well as for the
Windows operating system and other Microsoft products.

To use Microsoft Update:

1.

Open your Internet browser, go to 

http://www.microsoft.com

, and click 

Security & Updates

.

2.

Click 

Microsoft Update

 to get the latest updates for your computer operating system, programs,

and hardware.

3.

Follow the on-screen instructions to install Microsoft Update.

4.

Click 

Change settings

 and select a time for Microsoft Update to check for updates to the Windows

operating system and other Microsoft products.

5.

If prompted to do so, restart your computer.

Optical drive (select models only)

61

Summary of Contents for XT905UT
























































































































































































Reviews:

No comments