English
33
2 How to Install Accessories in Your Minitower PC
Installing Memory
To install a main memory module:
1
Disconnect the PC’s power supply cord and any connection to a
telecommunications network.
2
Remove the PC’s cover.
3
If necessary, remove the power supply unit.
4
Slide the memory module into the slot’s socket at 90
o
to the system
board (the module will only fit into the socket one way round).
5
Firmly press the memory module completely into the socket until
the retaining clips click into position.
If you need to remove a main memory module, release the retaining
clips and pull the module out of the socket.
6
Install any other accessories before replacing the power supply unit
(if you removed it earlier) and replacing the cover. Reconnect all
cables and power cords.
7
Check the summary screen to verify the new configuration (To see
the summary screen, press
while the
Vectra
logo is displayed
during system startup.)
spid.bk : spim-up2.fb4 Page 33 Tuesday, May 12, 1998 1:11 PM
