HP V1910 User Manual Download Page 19

Page: 19 / 483

Function menu

Description

User level

Modify

Allows you to modify FTP or Telnet user
information.

Management

Remove

Allows you to remove an FTP or a Telnet user.

Management

Switch To
Management

Allows you to switch the current user level to the
management level.

Visitor

Loopback Loopback

Allows you to perform loopback tests on Ethernet
interfaces.

Configure

VCT VCT

Allows you to check the status of the cables
connected to Ethernet ports.

Configure

Flow
Interval

Port Traffic
Statistics

Displays the average rate at which the interface
receives and sends packets within a specified time

interval.

Monitor

Interval
Configuration

Allows you to set an interval for collecting traffic
statistics on interfaces.

Configure

Storm
Constrain

Storm Constrain

Displays and allows you to set the interval for
collecting storm constrain statistics.
Displays, and allows you to create, modify, and

remove the port traffic threshold.

Configure

RMON

Statistics

Displays, and allows you to create, modify, and
clear RMON statistics.

Configure

History

Displays, and allows you to create, modify, and
clear RMON history sampling information.

Configure

Alarm

Allows you to view, create, modify, and clear
alarm entries.

Configure

Event

Allows you to view, create, modify, and clear event
entries.

Configure

Log

Displays log information about RMON events.

Configure

Energy
Saving

Energy Saving

Displays and allows you to configure the energy
saving settings of an interface.

Configure

SNMP

Setup

Displays and refreshes SNMP configuration and
statistics information.

Monitor

Allows you to configure SNMP.

Configure

Community

Displays SNMP community information.

Monitor

Allows you to create, modify and delete an SNMP
community.

Configure

Group

Displays SNMP group information.

Monitor

Allows you to create, modify and delete an SNMP
group.

Configure

User

Displays SNMP user information.

Monitor

Allows you to create, modify and delete an SNMP
user.

Configure

Summary of Contents for V1910




































































































































































































































































































































































































































































































Search results

Summary of Contents for V1910

Reviews:

Related manuals for V1910

Brands by name

Popular brands

HP V1910, User Manual

Search results

Summary of Contents for V1910

Reviews:

Related manuals for V1910

Brands by name

Popular brands