HP V1910, User Manual

Page: 160 / 483

148
Click Modify Port to enter the page for modifying the VLANs to which a port belongs, as shown in g .
g.
Assign GigabitEthernet 1/0/1 to VLAN 2 and VLANs 6 through 50 as a tagged member

Select GigabitEthernet 1/0/1 on the chassis front device panel.

Select the Tagged option in the Select membership type area.

Type VLAN IDs 2, 6-50 .
 Click Apply . A configuration progress dialog box appears.

After the configuration process is complete, click Close in the dialog box.
Table 45 Configure Switch B
Configure Switch B as you configured Switch A.
Configuration guidelines
When configuring the VLAN function, follow these guidelines:
 As the default VLAN, VLAN 1 cannot be created or removed.

You cannot create or remove VLANs reserved for special purposes.

Dynamic VLANs cannot be removed on the page for removing VLANs.
 You cannot remove a VLAN that has referenced a QoS policy.
 To remove a remote probe VLAN for remote port mirroring, you must remove the remote probe VLAN
configuration first.