HP V1910 User Manual Download Page 360

Page: 360 / 483

348



Select

Deny

as the operation action.



In the

IP Address Filter

area, select the

Destination IP Address

check box, and enter 10.0.0.1 in the text

box.



Enter 0.0.0.0 in the

Destination Wildcard

text box.



Click

Add

to finish the operation.

Table 121

Configure the 802.1X feature.

# Enable the 802.1X feature globally.



From the navigation tree, select

Authentication



802.1X

to enter the 802.1X configuration page.

Global 802.1X globally



Select the check box before

Enable 802.1X



Select the authentication method as CHAP.



Click

Apply

to finish the operation.

# Enable 802.1X on port GigabitEthernet 1/0/1.



In the

Ports With 802.1X Enabled

area, click

Add

Summary of Contents for V1910




































































































































































































































































































































































































































































































Search results

Summary of Contents for V1910

Reviews:

Related manuals for V1910

Brands by name

Popular brands

HP V1910, User Manual

Search results

Summary of Contents for V1910

Reviews:

Related manuals for V1910

Brands by name

Popular brands