manualshive.com logo in svg

HP -UX B6941-90001, Administrator'S Reference Manual, Page: 490 / 548

Share
Download
HP -UX B6941-90001 Administrator'S Reference Manual Download Page 490

490

Appendix A

ITO Managed Node APIs and Libraries

ITO Managed Node Libraries

AIX 3.2, 4.1, 4.2, 4.3

DCE

Library

libopc_r.o

libopc_r.a

 (AIX 4.x)

libopc_r.o

 (AIX 3.2)

libopc_r.a

Libraries
linked to the
ITO library.

AIX 3.2:

/usr/lib/libdce.a

/usr/lib/libpthreads.a

/usr/lib/libc_r.a

/usr/lib/libiconv.a

AIX 4.x:

/usr/lpp/OV/lib/libnsp.
a

/usr/lib/libdce.a

/usr/lib/libiconv.a

/usr/lpp/OV/lib/libnsp.
a

/usr/lib/libdce.a

/usr/lib/libiconv.a

Link and
compile
options

-D_THREAD_SAVE

-D_CMA_NOWRAPPERS_

-lopc_r -lpthreads
-lc_r

-D_THREAD_SAVE

 (3.2)

-D_CMA_NOWRAPPERS_

-lopc_r -lpthreads
-lc_r

-D_CMA_NOWRAPPERS_

-lopc_r -lpthreads
-lc_r

Description

Version 3.2 is obsolete with
ITO A.05.00.

Note:

Only ITO A.04.xx integrations
built on AIX 4.x with above
options can be run on ITO
A.05.00

AIX 3.2, 4.1, 4.2, 4.3

NCS

Library

libopc.o

libopc.o

n/a

Libraries
linked to the
ITO library.

/usr/lib/libnck.a

/usr/lib/libiconv.a

n/a

Link and
compile
options

-lopc

-D_THREAD_SAVE

 (AIX 3.2)

-D_CMA_NOWRAPPERS_

-lopc -lpthreads -lc_r

n/a

Description

AIX 3.2 only

n/a

ITO Version

ITO A.03.xx

ITO A.04.xx

ITO A.05.00

Summary of Contents for -UX B6941-90001





































































































































































































































































































































































































































































































































































Reviews:

No comments