manualshive.com logo in svg

HP -UX B6941-90001, Administrator'S Reference Manual, Page: 272 / 548

Share
Download
HP -UX B6941-90001 Administrator'S Reference Manual Download Page 272

272

Chapter 5

Configuring ITO

Flexible-management Configuration

messages are sent to the management server name stored in the

primmgr

 file. If the

primmgr

file does not exist, messages are

sent according to the

opcsvinfo

 file.

• DESCRIPTION

A string describing the message target rule condition.

• SEVERITY

A severity level from: Unknown, Normal, Warning, Minor, Major,
Critical.

• NODELIST

A list of nodes.

• NODE <node>

A node can be specified in different ways, for example:

NODE

IP 0.0.0.0 hpbbn

 If the node is defined using the format IP

<ipaddress> or IP <ipaddress> <string>, you should normally
use the IP address “0.0.0.0”. The real IP address is then
resolved by the domain name service (DNS).

• APPLICATION

A string containing the application name.

• MSGGRP

A string containing the name of the message group.

• OBJECT

A string containing the name of the object.

• MSGTYPE

A string containing the description of the message type.

• MSGCONDTYPE

Two condition types are possible:

• Match

The condition is true if the specified attributes are matched.

• Suppress

The condition is true if the specified attributes are not
matched.

Summary of Contents for -UX B6941-90001





































































































































































































































































































































































































































































































































































Reviews:

No comments