manualshive.com logo in svg

HP -UX B6941-90001, Administrator'S Reference Manual, Page: 260 / 548

Share
Download
HP -UX B6941-90001 Administrator'S Reference Manual Download Page 260

260

Chapter 5

Configuring ITO

Preconfigured Elements

General Configuration Tips Regarding File
Names

If you provide

actions/cmds/monitor

 command files for MPE/iX

managed nodes on the management server in:

/var/opt/OV/share/databases/OpC/mgd_node/\

customer/hp/s900/mpe-ix

make sure that the file names are not longer than 8 characters. The
characters underscore ( _ ) and dash ( - ) are not allowed.

MPE/iX does not distinguish between upper and lower case letters.

Only ASCII files are supported. Binaries for automatic distribution to
MPE/iX are not supported because the appropriate MPE/iX file code is
not known to the management server.

Summary of Contents for -UX B6941-90001





































































































































































































































































































































































































































































































































































Reviews:

No comments