manualshive.com logo in svg

HP -UX B6941-90001, Administrator'S Reference Manual, Page: 419 / 548

Share
Download
HP -UX B6941-90001 Administrator'S Reference Manual Download Page 419

Chapter 10

419

Tuning, Troubleshooting, Security, and Maintenance

Troubleshooting: Specific Problems

Problem

ITO agents stop processing due to too many files being open.

Description

If the permanent file,

LASTUUID.PUB.HPNCS

 has not been created, NCS

creates a temporary one, which it does not close. Over a period of time, it
tries to re-creates this file many times. The result is that the number of
open file descriptors increases, and the system table used to administrate
open files is overloaded. It is then not possible to open any new files.

Solution

Check that the file

LASTUUID.PUB.HPNCS

 exists:

listf LASTUUID.PUB.HPNCS

If the file does not exist, stop all ITO agents, working as user
AGENT.OVOPC:

opcagt.bin -kill

Create a new file as user MGR.HPNCS:

hello agent.ovopc

opcagt.bin -kill

hello mgr.hpncs

build lastuuid.pub.hpncs

hello agent.ovopc

opcagt.bin -start

Summary of Contents for -UX B6941-90001





































































































































































































































































































































































































































































































































































Reviews:

No comments