manualshive.com logo in svg

HP -UX B6941-90001, Administrator'S Reference Manual, Page: 164 / 548

Share
Download
HP -UX B6941-90001 Administrator'S Reference Manual Download Page 164

164

Chapter 4

Software Maintenance on Managed Nodes

This chapter provides important information about installing and
de-installing ITO software on managed nodes with various operating
systems. The installation, de-installation, and updating of ITO software
is referred to as “software maintenance”. This chapter includes:

❏

Installing and upgrading the ITO agent software using the GUI.

❏

De-installation of the ITO agent software using the GUI.

❏

Checking installed agent software packages on the management
server.

❏

Removing ITO agent software packages from the management server
that are no longer required.

NOTE

For information about adding an additional ITO agent software package
to the management server, see the HP OpenView IT/Operations
Installation Guide for the Management Server.

Summary of Contents for -UX B6941-90001





































































































































































































































































































































































































































































































































































Reviews:

No comments