HP -UX B6941-90001, Administrator'S Reference Manual

Page: 190 / 548

190 Chapter 5
Configuring ITO
Preconfigured Elements
U Unmatched Message
An Unmatched Message does not match any of the
filters defined for a message source. Filters are sets of
conditions which configure ITO to accept or suppress
messages. These messages require your special
attention because they can represent problems for
which no preconfigured action exists. In general, you
should inform the ITO administrator of unmatched
messages so that they can improve the corresponding
message, or suppress conditions.
I Help instructions
Instructions help you resolve the problem. If available,
these instructions are displayed in the
Message
Details
window.
A Automatic Action
Indicates that an automatic action has been configured
for the message, and gives the status of the action. The
value of the attribute tells you if the action:
S was successful
F has failed
R is running
O Operator-initiated Action
Indicates that an operator- initiated action has been
configured for the message, and gives the status of the
action. You start these actions after reviewing the
message. The value of the attribute tells you if an
action is:
X available
S successful
F failed
R running
N Annotations