HP -UX B6941-90001, Administrator'S Reference Manual, Page: 317 / 548

Chapter 7 317
Integrating Applications into ITO
Integrating Applications into ITO
Integrating Applications into ITO
ITO allows graphical invocation of applications (“point and click”) by
means of the operators’
Application Desktop
. A different set of
applications can be assigned to each ITO operator to match specific
requirements.
If you have purchased an application which is prepared for ITO
integration (for example, HP OpenView OpenSpool, HP OpenView
OmniBack II, or HP OpenView OmniStorage) you can integrate it
quickly and easily using
opccfgupld(1M)
.
You can integrate applications into the following components of ITO:
❏
operators’
Application Desktop
or administrator’s
ITO
Application Bank
❏
broadcast
❏
automatic/operator-initiated actions, and scheduled actions
❏
monitoring
❏
logfile encapsulation
❏
SNMP trap and message interception
This section also explains how ITO starts applications and broadcasts.
Integrating Applications into the Application
Desktop
You can add your own applications to the
ITO Application Bank
and
assign them to an operator. The applications are then invoked when the
operator double-clicks a symbol in the
Application Desktop
. You can
add the following types of applications to the
ITO Application Bank
:
• ITO applications
• HP OpenView applications