HP Surestore 80ex - Optical Jukebox, User Manual

Page: 45 / 96

Chapter 3 3-13
Operating the Jukebox
Using the Front Panel Features
Op
eratin
g th
e
Ju
kebo
x
information about checking the SCSI bus status. If your computer is connected to a
LAN, be sure to check with your system administrator before turning off power to
the jukebox.
13. Turn the jukebox OFF, then ON to save the code to the jukebox flash ROM.
Setting Non-Security Configurations
Start with
READY
in the display.
1. Press
NEXT
until
CONF *
displays.
2. Press
ENTER
.
CONF 0
and a flashing
0
displays.
3. Press
NEXT
until the number of the option you want to change displays.
NO
CONFIG displays if you choose an invalid number.
4. Press
ENTER
.
The current default setting displays. It may be any one of these settings
•
OFF
or
ON
• a number
5. Select the option you want by pressing
NEXT
or
PREV
.
6. Press
ENTER
.
SET
displays.
7. Press
CANCEL
to exit.
CAUTION The next step is to turn off the jukebox.
Do not turn off power to the jukebox until you are sure the SCSI bus is inactive.
Removing power from a SCSI peripheral when the bus is active can result in data
loss and/or indeterminate bus states. Check your host system manuals for
information about checking the SCSI bus status. If your computer is connected to a
LAN, be sure to check with your system administrator before turning off power to
the jukebox.
8. Turn the jukebox OFF, then ON to save the code to the jukebox flash ROM.