HP Surestore 15 Slot with DLT7000 User Manual Download Page 125

Page: 125 / 136

C-7

TapeAlert Messages

TapeAlert Messages and Descriptions

lert
M
e

ges

No.

Flag

Type

Displayed Message

Additional Action

Information

Hardware A

The library mechanism is
having difficulty
communicating with the
drive.

1. Turn the library off then

on.

2. Restart the operation.

3. If the problem persists,

call the library supplier
helpline.

Inspect the library to make
sure all cable and power
connections are secure and
tapes inserted correctly.

Hardware B

There is a problem with the
library mechanism. If the
problem persists, call the
library supplier helpline.

Inspect the library to make
sure all connections are
secure and tapes inserted
correctly.

Hardware C

The library has a hardware
fault:

1. Reset the library.

2. Restart the operation.

Check the library users
manual for device specific
instructions on resetting
the device.

If the problem persists, call
the library supplier
helpline.

Summary of Contents for Surestore 15 Slot with DLT7000









































































































































Search results

Summary of Contents for Surestore 15 Slot with DLT7000

Reviews:

Related manuals for Surestore 15 Slot with DLT7000

Brands by name

Popular brands

HP Surestore 15 Slot with DLT7000, User Manual

Search results

Summary of Contents for Surestore 15 Slot with DLT7000

Reviews:

Related manuals for Surestore 15 Slot with DLT7000

Brands by name

Popular brands