HP Surestore 15 Slot with DLT7000, User Manual

Page: 63 / 136

3-9
Operating the Library
Entering the Administration Menu Password
L
ibrary
O
perat
io
n
Entering the Administration Menu Password
A numeric password is required to access options beneath
ADMIN*
menu of the
library (see Figure 3-2 on page 3-8). A three-part default password of 000-000-000
is set at the factory. To change the password, see “Setting a New Administration
Menu Password” on page 3-10.
To enter the password:
1. Verify that the drive status displays. If it does not display, press
CANCEL
until it
does.
2. Press
NEXT
until ADMIN * displays, then press
ENTER
.
3.
PSWD 000-000-000
displays, and the first set of zeros flashes.
Press
ENTER
to accept this number (if no password has been set), or press
NEXT
or
PREV
until the correct number displays. Press
ENTER
.
4. The middle set of zeros flashes.
Press
ENTER
to accept this number (if no password has been set), or press
NEXT
or
PREV
until the correct number displays. Press
ENTER
.
5. The last set of zeros flashes.
6. Press
ENTER
to accept this number (if no password has been set), or press
NEXT
or
PREV
until the correct number displays.
7. Press
ENTER
.
INFO *
displays.
To access options under the
ADMIN *
menu, press
PREV
or
NEXT
until the desired
option displays, then press
ENTER
.
1 2
→
ADMIN *
→
CONFIG *