HP Surestore 15 Slot with DLT7000, User Manual

Page: 91 / 136

3-37
Operating the Library
Using Online Drive Replacement
L
ibrary
O
perat
io
n
5. Press
NEXT
or
PREV
until
DRIVE STATUS
displays, then press
ENTER
.
DRV 1
ON GOOD displays.
• If the damaged tape is in drive 1, press
ENTER
.
• If the damaged tape is in drive 2, press
NEXT
until
DRV 2 ON GOOD
displays,
then press
ENTER
.
DRV # ON GOOD
displays, where “#” is the drive number and
ON GOOD
is
flashing.
6. Press
NEXT
until
DRV # OFF FAILED
displays then press
ENTER
.
7.
CHANGE CONFIRMED
displays briefly, then
ONLINE REPAIR *
displays.
Press
ENTER
.
8.
DRIVE POWER *
displays.
9. Press
NEXT
or
PREV
until
DRIVE STATUS
displays, then press
ENTER
.
10. Press
NEXT
or
PREV
until
DRV # OFF FAILED
displays (where “#” is the
number of the drive that was just taken off-line) then press
ENTER
.
11.
DRV # OFF FAILED
displays, where “#” is the drive number and
OFF
FAILED is flashing.
12. Press
NEXT
until
DRV # ON GOOD
displays, then press
ENTER
.
13. SETTING UP DRIVE displays briefly while the drive communication tests run,
following by
CHANGE CONFIRMED
and then
ONLINE REPAIR *
.
14. Press
CANCEL
twice to return to the drive numbers and status indicators (“ready”
state).
15. Try reading the damaged tape again.
• If the tape can be read, back up data from the damaged cartridge to another
tape cartridge and discard the damaged one.
• If the tape cannot be read, call your service representative.