Installation
20
Network Storage Router M2402 User Guide
5. Attach an inner rail to each side of the router.
See
for an illustration.
a.
With the spring-latch facing away from the router and the circular
grasping hole facing the front-side of the router, align the front-most
screw-hole on the router with the center screw-hole on the rail.
Using this alignment, two screw holes will be aligned and the rail will
extend out from the front-side of the router approximately 8 inches.
b.
Secure the rail to the router using two #6-32x.312 Phillips screws.
Figure 16: Attaching inner rails to the router
c.
Repeat Step 5 to attach the inner rail to the other side of the router.
6. Install the router in the rack.
See
for an illustration.
a.
Move the ball-bearing slide on each of the outer rails towards the front of
the rack.
b.
From the front-side of the rack with the front-side of the router facing out,
align the inner and the outer rails and slide the inner rail into the outer rail.
c.
When the rails lock in place, press in the spring-latches on each of the
inner-rails and push in the rest of the way.
Inner Rail
Back End
Spring Latch
Front End
Summary of Contents for StorageWorks M2402
