HP StorageWorks M2402, User Manual

Page: 107 / 282

Visual Manager User Interface
89 Network Storage Router M2402 User Guide
SCSI Map settings:
■
Clear Map clears all entries from the current map.
■
Fill Map fills in the current map.
When the map is filled, the display will show the current devices.
■
Remove Gaps removes any incremental gaps in the sequence of LUN listed
in the table.
When the system removes gaps from the table, the LUN are renumbered in
sequential order, starting with LUN 0.
Note: Some operating systems require gaps be removed in the mapping table to detect
all devices.
■
Delete deletes map entries.
To delete a range of LUNs, select the beginning LUN to delete from the
‘from’ drop-down box and select the last LUN to delete from the ‘to’
drop-down box.
■
Discovered Device Entry adds a discovered device to the map.
To add a discovered device to the map, use the drop-down boxes to enter the
settings, and then click Create Entry in the Discovered Device Entry section
of the screen.
■
Manual Device Entry creates a map entry for a device that is not yet
discovered or installed.
To add a new device to the map, use the drop-down boxes to enter the settings,
and then click Create Entry in the Manual Device Entry section of the
screen.
Note: SCSI maps can be filled or devices can be added to them only when at least one
SCSI Target ID has been enabled in the SCSI bus configuration menu.