HP StorageWorks M2402, User Manual

Page: 219 / 282

Basic Troubleshooting
201 Network Storage Router M2402 User Guide
Verifying Serial Port Configuration
Verify the configuration of the terminal or terminal emulation program.
If problems persist, verify the cabling.
If a valid Ethernet IP address is configured, serial configuration settings can also
be set via SNMP and Telnet.
Verifying PRLI Data
The router returns the PRLI (preliminary login) response data as specified in . In
the default configuration, the router returns PRLI Data (PRLI Accept Payload)
with the Target bit SET and the Initiator bit CLEAR. However, some
configurations require the Initiator bit be SET, such as in router-to-router
configurations. See the Fibre Channel configuration sections of
Chapter 4 , “Visual
Manager User Interface,” or Chapter 5 , “Serial/Telnet User Interface,” for
information.
Table 5: Terminal EmulationConfiguration Settings
Item Setting
BAUD Rate
Autobaud, 9600, 19200, 38400, 57600, 115200
Data Bits 8
Stop Bit 1
Parity None
Flow Control XON/XOFF